How to solve the problem in commutator turning machine ND-WGK-2X
AC drive.Inout is Ok but output is not getting, how to solve?
There are two possibility which may cause the problem,
1. The inverter have problem
2. The black swith for adjusting speed have problem
You could verify if inverter problem by below method,
Please DO take a picture of the wires connection of inverter firstly for recording the wire connction status,
then connect the yellow wire as attached file, then press on the inverter Run on it to see if the motor will work (the belt moving)
By this method you could find out the problem and please inform me the result after that,