Paramtents
Structure Deep Groove
Type Ball
Packging & Delivery
Min Order5000 piece
Briefing
Detailed
Nide takes special car with its raw material used in its bearings. Theraw material applied in the bearing rings and rolling elements is from thecompanies that sell same quality material to world top class bearingmanufacturers in Japan and Europe. Also, NIDE’s latest computerized heattreatment system and technology distinguish NIDE brand bearings form others. Ithelps the bearing material to reach the characteristics of high level ofhardness, high rolling contact fatigue resistance, excellent wear resistance,dimensional stability and excellent mechanical strength which is essential todelay the advent of material fatigue.
Cage material
Material for cages is required to have properties of good wearresistance, dimensional stability and good mechanical strength. Cold-rolledsteel is used for pressed cages.
Sheet steel No. | Chemical composition % | ||||||
C | Si | Mn | P | S | Ni | Cr | |
JISG 3141 SPCC | <0.12 | — | <0.5 | <0.04 | <0.045 | — | — |
Polyamide resin is applied depending on the type of bearing and theapplication, but should not be used at temperatures above 120℃ or below -40℃. Polyamidecages may be affected by the use of specific lubricants. Brass cages are notsuitable in Ammonia(eg in refrigeration) because Ammonia causes cracking inbrass. So for selection of cage material, it is important to consider theoperation conditions.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.