Paramtents
Stator diameter 150~300mm
Winding number 1~9 pcs
Stator height 15~35mm
Power supply 220V/ 50/60HZ 1.5KW
Weight 400kg
Air source pressure 0.5~0.7MPa
Dimension 1300*800*1500mm
Name motor winding machine
Packging & Delivery
Min Order1 piece
Briefing
Detailed
This wheel motor winding machine is designed for the electric bike.It does the winding under the control of servo motor. Its HMI could diagnose the fault,count and save the output etc. Also,wheel motor winding machine could be set up automatic wire feeding, multi-diameter wire winding, automatic indexing,automatic slot-skipping, winding speed etc.It is of easy operation and highly efficiency.
Technical parameter:
Wire diameter | 0.2~1.0mm |
Stator diameter | 150~300mm |
Winding number | 1~9 pcs |
Stator height | 15~35mm |
Power supply | 220V/ 50/60HZ 1.5KW |
Weight | 400kg |
Air source pressure | 0.5~0.7MPa |
Dimension | 1300*800*1500mm |
Weight | 3000Kgs |
Information needed for wheel motor r Coil Winding Machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator drawing
2. Stator winding drawing
3. Winding distribution drawing
4. Other technical requirement
If possible, it will be better if customer can send us samples.
Operator step
1. Power on the machine
2. Thread wire this this motor
3. Set the winding parameter in the touch screen
4. Press the "start" button.
5. Machine will do winding process automatically
6. After finishing the winding, machine will stop
7. Take out the wire from the tooling.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.