Packging & Delivery
Min Order1 piece
Briefing
Detailed
Specification
Stator ID:30~110mm
Stator OD:Max. 160mm
Stack length:20~150mm
Winding overhang range:15--50mm
Power:380V/50/60HZ 1.5KW
Machine weight:about 700kg
Machine dimension:L850*W1000*H2300mm
Main components
PLC:Mitsubishi(Produced in Dalian)
Oil pump:Jingyuan
Sensor:Autonics
Button/switch:Schneider
Other electric elements:Delixi/Schneider
Machine main function and characteristic
1. This machine adopts whole hydraulic system and PCL program.
2. This machine can adjust the forming stack length by changing washer.
3. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.
4. Production capacity ≤13s/set (exclude loading/unloading time)
5. Primary qualification rate ≥99.5%, after rework, the rate ≥99.9%
6. This machine adopts safety grating protection system. Operator need to stand when operating.
7. Machine adopts two hands simultaneo
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.