Paramtents
Condition New
certification CCC
Working station Single working station
Machine size Middle size
HS code 8479899990
Packging & Delivery
Min Order1 piece
Briefing
Detailed
This stator coil lacing machine is equipped with pressing, automatic feeding, automatic cutting device. The stator should be loaded vertically into this lacing machine. The overhang windings are simultaneously laced by two twin needles controlled by servo system. The needle indexing, hooking and stator indexing process are controlled by servo system. The spindle adopts frequency speed control. The lacing type, such as slot by slot lacing, interval lacing, and fancy lacing could be programmed in the touch screen. This lacing machine is characterized by compact appearance, fast speed, low noise; simple operation and easy tooling change.
Applications:
This machine is appropriate for micro induction motor like conditioner motor, washer motor, compressor motor, fan motor, alternator motor, pump motor etc.
Machine structure
This machine is consist of machine body, needle, nozzle rotating part, needle fore and back movement,nozzle swing part, needle up and down movement part, stator indexing part,thread feeding,thread cutting part.
Lacing machine technical data
Min. stator ID | 33mm |
Max. stator OD | 150mm |
Over-hang height | 15~48mm |
Stator stack length | 15~120mm |
Pitch time | About 0.5~0.7sec/slot |
Power supply | 380V/50/60Hz |
Air pressure | 0.5~0.8MPa |
Power | 3KW |
Dimension | 1570 x 670 x 1680mm |
Weight | About 900kg |
Lacing machine operation method
1. Connect machine to power source and air source. Do threading.
2. Put the stator in the tooling.
3. Switch to "auto" mode. The press "start" button by two hands.
4. Machine will automatically do the lacing.
Competitive advantages
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.