Information needed for rotor commutator fusing machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Rotor assemble drawing: wire diameter2. Commutator drawing3. Shaft drawing4. Required productivity5. Other technical requirementIf possible, it will be better if customer can send us samples.

Information needed for Automatic BLDC Stator Coil Winding Machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples.

Information needed for coil winding machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples.

Information needed for coil winding machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples.

Material needed for stator winding machine1. Stator drawing2. Stator application3. Stator wound sample4. stator production requirement5. Copper wire and unwound stator

Question: Plese send the quotation of rotor with the rotor injected,Answer: We need the drawing of injected rotor because we need to know the aluminium ring height, width and if the pin required or not, all these are related the aluminium volume. The volume different, then the price is different. Please kindly provide

For Litz wire (Fil de Litz) winding machine, you may consider 3M method for save cost if 3M is cheaper than glue in your country,For 3M method, you only need one set fixture (bottom fixture and up fixture) which is USD110, the process is as below,The video http://..........com/u81/v_OTY1MjU1MTA.html will help you try to understand the process1. Put on the tooling to the machine 2. Put on the bot...

Indution cooker disk is related to the induction cooker power because there should be enough space for the litz wire to go through,and also please consider the process of producting the whole product,

The material H13 is material for good quality bakelite, The Electric Heating Pipe,temperature controller Oven,the injection machine need to work with mold,

In commutator hostacking machine, collet is not broken, only shaft holding inner dia is increased.Before the collet broken, did you check if the V holder was in proper position and wheather the armature and V holder base are working properly?Please check the V holder and adjust it in proper position, then the collet won't be worn out easily,Loose size is not so big .Some time Armature not moving ...

Theorily speaking,coating thickness is adjustable by setting temperature and coating period. Practically speaking, it has direct relationship with the powder property. If the powder is limited to fast curing property, the coating thickness could be adjusted too but the coating suface is not perfect (the surface might be a little rough).

When design the paper size, we consider the armature sample, the armature lamintation and paper sample from customer, and give a suggestion on paper size, such as insulation paper width and thickness, Then when you use the machine, please follow the insulation paper size we suggested.The whole set tooling including paper press wheel, the forming block, the plate for paper going though,the base for...

Hydraulic oil no is 20#,please clear the rest oil in tank,and add clean 20 lubricating oil,then start machie,put in action no 100 to let the oil pump run about 1 minute to let the oil go through fully,only after that could run the machine.

Electrical insulation papers are paper types that are used as electrical insulation in many applications due to pure cellulose having outstanding electrical properties. Cellulose is a good isolator and is also polar, having a dielectric constant significantly greater than one.[1] Electrical paper products are classified by their thickness, with tissue considered papers less than 1.5 mils thicknes...

Our machines could use for both aluminum and copper wire, the main difference between aluminium and copper is: aluminum is cost saving, weight is lighter, but temperature rise is higher, connection is easier to get broken, and easier to be oxidized,effieiency is less. While copper is more expensive, the other is better