Mercury outboard motor components

Mercury Marine outboard motors, induction motor machine has been producing since 1939. Has been and will continue to product improvements, engine lower part of the basic components are still fairly stable. Mercury outboard engine components is to reduce the engine with water to provide thrust to move ship.

Propeller
Mercury outboard propeller is the end of the lower part of an integral part. Propeller, ranging from the number, the most three, four or five blades. The use of standard three-blade propeller in the water to provide the best output. Four or five blades better, if the propeller near the surface to run, to provide more acceleration. Clockwise rotation of the blade, the first leading edge of the cutting blade through the water. Follows behind the trailing edge of the blade. With the rotating blades, the water is pushed, then pulled back. This action causes stress, alternator machine resulting in the continued thrust move the ship.

Transmission shaft
The drive shaft transmitting torque motor, propeller rotational force. The axis of rotation, so that the propeller. Propeller rotation, and then sent back to it to create thrust and the ship forward.

Small parts
Many small portion needs to be connected to the propeller shaft. They include bearings, O rings, seals, gaskets, nuts and bearing carrier. automatic armature winding machine inside the propeller, the ribs connect the inside and outside the hub.