The ND-R160 is very easy to operate, with a CNC panel, it apply to fan motor, pump motor, air conditioner motor, three phase machine,
It is commonly used in induction motor winding with cheap price,
Technical parameter:
Wire diameter 0.08~1.0mm
winding form diameter <= 250mm
Winding head 1~8
Transfer distance >=170mm
Max. Rotation speed 3200rpm
Dimension:1550mm*1250mm*1300mm
Please follow below steps,
1.Start step -> 1 -> Ent
End step -> 4 -> Ent
Edit -> Ent
2. automatically go to SHIFT, put the wire close to RIGHT side of the tooling's first slot,
by press the button ← → to move the rod and let the wire parallel to tooling, ENT
Then auto go to 2 , put the wire close to LEFT side of tooling's second slot,press button as above,ENT
go to 3, Wire close to LEFT, press button as above, ENT
go to 4, LEFT, press button, ENT
3. WIDTH, put in the data, let it be 7.00 ENT
press COPY AND ENT three times
4. PITCH (wire diameter) put in data, let it be 0.7mm, ENT,
press COPY AND ENT three times
5. TURNS NO. put in the turns no you needed, ENT
press COPY AND ENT three times
6. S.SLOW put in date let it be 1.0, ENT
press COPY AND ENT three times
7. E.Slow put in date let it be 10, ENT
press COPY AND ENT three times
8. H.S put in date , let it be 99, ENT
press COPY AND ENT three times
9. L.S let it be 5, ENT
press COPY AND ENT three times
10. FUN , no function , just leave it ,
After that When the data 1 appear, the three light FEED DIR,WINDDIR, AUTO HOME is on
ENT
date 2 appear, WIND DIR,AUTO HOME, AUTO START is on
3, 4 same as 2, ENT
Press green button to start the machine