Packging & Delivery
Min Order1 piece
Briefing
Detailed
Single-head and double-station automatic winding machine; It automatic put the coil into transfer former orderly. Winding mode such as automatic skip, automatic cutting and automatic indexing can be finished at a time successively; Parameter could be set in human-machine interface, winding tension is adjustable; Obtain continuous/discontinuous winding way and meets the 2 poles, 4 poles and 6 poles coils winding, Especially suitable for coils winding in the stator of high slot filling rate but small slot notch;
Main technical data
Winding head: 1pc
Wire diameter: 0.17~1.2mm
Winding speed: ≤2200RPM
Max flier track: ¢400mm
Transfer number: 2~6section
Power supply:380V/50/60HZ 7KW
Weight: about 1100kg
Dimension: L1800*W1100*2200mm
Main components
Servo motor:Mitsubishi
Control system:Yitu Taiwan
Touchscreen:Tongtai
Sensor: Autonics
Switch and Button: Schneider
Other electric parts: Delixi /Schneider
Machine main function and characteristic
1. Winding tooling: each machine has one set winding tooling and three vertical winding forms.
2. The whole set of tooling can be changed, and it takes about 15min.
3. The turntable is two stations structure. It adopts servo system to rotate and index transfer form.
4. Allow three wires winding simultaneously.
5. Main spindle is controlled by servo motor. The coil turn number accuracy is ±1 turn.
6. The working rotation speed can be set . Machine has no distinct vibration and noise.
7. Free of enamel damage and wire snap. Once the copper wire is run out, machine will automatically stop.
8. PLC can set turn number, winding speed, tooling sunk height, tooling sunk speed and winding direction.
9. X and Y spindle of wire hooker and wire cutter adopts servo system. It can adjust the length of bridge wire and lead wire.
10. Tooling sunk adopts servo system. The max segment num
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.