Five-working station Generator Armature Automatic Balancing Machine

group name: Armature balancing machine

Min Order: 1 piece

brand name: NIDE

model: ND-BFZSZ-5L-A

Nearest port for product export: SHANGHAI, NINGBO

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, Express Delivery

Acceptable payment methods: T/T, L/C

Export mode: Have the independent export and import right

update time: Tue, 19 Jul 2016 14:33:28 GMT

contact supplier

Paramtents

Color as per customer's requirment

Packging & Delivery

Min Order1 piece

Briefing

there are 5 working stations,PLC controlled, all the data can be set on the touch screen.High efficiency and precision.

Detailed

Five-working station Generator Armature Automatic Balancing Machine

Quick Detail:

1. there are 5 working stations

2. double cutter, equipped with production line.

3. Cutting depth and length can be controlled.

4. High efficiency and precision.

5. PLC controlled, all the data can be set on the touch screen.

6. Mechanical arm

Description:

For this type of Five station Armature Balancing Machine, armature does not need to mark, directly put on the conveyor, there are 5 working stations: loading and unloading station, initial measuring station, left side cutting station, right side cutting station and remeasuring station. High efficiency and precision.PLC controlled, all the data can be set on the touch screen.

Machine consist by idle station (station0), initial test station (station1), commutator end processing work bench (station 2), shaft end processing work bench (station3) and retest station (station 4) such five station in total. Besides, it is also include five machine hands,transportation line,drilling main shaft and dividing devices.

Technical Parameter

Items	Details
Type	Five-station generator auto-balancing machine
Main components configuration	Cylinder: SMC Servo motor: Mitsubishi Sensor: KEYENCE,OMRON,CONTRINEX LCD touch screen: KEYENCE Control PLC: KEYENCE KV-3000 Stepping motor: Oriental Motor
Armature Diameter	Stack height: 30-100mm Armature diameter: Φ80~115
Balancing speed	1500-2200rpm
Milling method	Drilling
Power	AC380V
Air supply	0.4~0.6Mpa
Initial unbalance
Cycle time	25-30s
Residual unbalance eccentricity	Better than the national standard for Grade 6.3
Volume (length x width x height)	2200 x 1700 x 1800 mm

The procedure of single circle runs as following:

Transportation line take generator armature to idle station (station 0);

Machine hands transport it from idle to initial test station (station 1) to measuring original unbalance mass, positioning the right place and depth before process.

Machine hands move armature to next station (station 2) in order to process imbalance amount of commutator end.

Machine hands move generator armature to next station (station 3) in order to process imbalance amount of shaft end. Before that, machine hand will turn 180 degrees of armature to lead shaft end out towards.

Machine hands move product to retest station (station 4), measuring the permissible residual unbalance. Before that, machine hand will turn 180 degrees of armature to lead shaft end inner towards.

Machine hands move product back to original station (station 0), while the armature is qualified after test, machine will pick up next one from idle station to start another round processing, good one will come back to transportation line. If the result is not within permissible residual unbalance, system command the machine come back to the first stage and restart a copy. There are five stations in this machine, so it is possible to process five pieces in the mean time.

Production Cycle time:

The way of process is radial drilling method, use F6~ 8 driller; the cycle time 25 to 30 seconds per unit in condition of initial unbalance amount within 300gmm.

The working station of this rotor armature winding machine