This stator winding machine is suitable for winding two pole stator. auto form assemble ,high efficiency and labor saving.
This type of stator winding machine is suitable for winding two poles motor stator. Equipped with 2 working station, it can do auto winding, auto indexing, and auto cutting process. The machine is of high efficiency and labor saving.
ND-SW-2 STATOR WINDING MACHINE
Parameter:
- Stack height 10-70
- Stator ID 20-60
- Stator OD 50-130
- Stator poles No. 2
- Wire diameter 0.15-1.3
- Lubrication mode: continuous lubrication oiling machine
- AC380V, 50/60Hz, 4.5KW, air pressure 57kg/cm2
- About 1200kgs, 1500 x 2100 x 1650mm
Function:
- Cast iron or steel frame can absorb the shock. Accuracy is stable. The maximum winding speed is up to 450rpm (according to the wire diameter).
- All the actions are fully automatic (including loading and unloading). The winding could be more stable and efficient.
- The cutting part structure is in compact. Wire clamping and cutting is finished at the same time.
- Easily to change the fixture for different types of stators.
- Fixtures are in cycle operation automatically. It is benefit for the on-line operation.
- Permanent magnet tensioning device enables the tension adjustment.
- Travel and swing angle is adjusted within 150-220mm (mechanical adjustment). It could adapt to different requirement of different stator models.
- 2 working stations
Information needed for Stator Winding Machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator drawing
2. Stator winding drawing
3. Winding distribution drawing
4. Other technical requirement
If possible, it will be better if customer can send us samples.